Skip to product information
1 of 1

SlackSpec

SlackSpec 48-54mm Chain Slack Min/Max Gauge 1.89–2.13 in for Kawasaki KX250, KX250F, KX250X, KX450 and KX450X 2022–2027 | Made in USA

SlackSpec 48-54mm Chain Slack Min/Max Gauge 1.89–2.13 in for Kawasaki KX250, KX250F, KX250X, KX450 and KX450X 2022–2027 | Made in USA

Regular price $14.95 USD
Regular price Sale price $14.95 USD
Sale Sold out
Shipping calculated at checkout.
Quantity

Free US shipping over $14.95 · 30-day free returns · Made in Arizona

Pre-order: SlackSpec 48–54 mm (1.89–2.13 in) Chain Slack Min/Max Gauge for 2022–2026 Kawasaki KX250 and 2027 KX250F.

Shipping note: this gauge is in development, with production starting soon. Please expect a one to two week delay before your order ships.

The SlackSpec min/max chain slack gauge checks 1.89–2.13 in (48–54 mm) chain slack on the models listed under Fit and compatibility. It sits on the bare swingarm at the rear end of the chain slipper, and measures up to the bottom of the chain, while you adjust.

Key features

  • Min and max marked: one side is 1.89 in (48 mm) minimum slack, the other is 2.13 in (54 mm) maximum.
  • Made for the Kawasaki measurement: profiled to sit on the bare swingarm at the rear end of the chain slipper, not on top of the slipper body.

Specifications

Range 1.89 in (48 mm) minimum to 2.13 in (54 mm) maximum chain slack. The owner's manuals print this as 48–54 mm (1.9–2.1 in); 1.89–2.13 in is the exact conversion.
Chain 520 × 114, the size listed in the 2022–2027 Kawasaki owner's manuals and parts data.
In the box 1 gauge.
Origin Made in Arizona, USA: designed and 3D printed by AzJake Creations in Arizona.

Fit and compatibility

Fits the models and years below when the owner's manual lists 48–54 mm (1.9–2.1 in) chain slack, measured from the swingarm at the rear end of the chain slipper up to the bottom of the chain. Year ranges are [primary] from those owner's manuals.

Kawasaki
KX250: 2022–2026 [primary], including the 2024 50th Anniversary KX250. Not 2021 (the 2021 owner's manual was not opened; see Needs a manual check).
KX250F: 2027 [primary]. On 2027, Kawasaki names this bike KX250F.
KX250X: 2022–2026 [primary]. The KX250X owner's manuals list the same 48–54 mm range and the same measurement as the KX250.
KX250FX: 2027 [primary]. On 2027, Kawasaki names this bike KX250FX.
KX450: 2022–2026 [primary].
KX450X: 2022–2026 [primary].

Needs a manual check

2021 Kawasaki KX250 is left out of the title and the bullets above. A 2021 owner's manual (item 99803-0096) is listed on Kawasaki Owner Center, but the manual viewer returned an error and the slack figure was not verified. Check that year's owner's manual before treating 2021 as 48–54 mm. The 2021 and earlier KX models and the 2027 KX450F/FX use a different spec, so they are not listed.

What's in the box

1 gauge.

Use and care

  • Raise the rear wheel off the ground. Rotate the rear wheel to find the tightest point in the chain.
  • Set the gauge on the bare swingarm at the rear end of the chain slipper. Do not sit it on the slipper body forward of that rear end.
  • Push the chain up in the middle of the upper run. Adjust until the bottom of the chain sits between the MIN and MAX marks.
  • Rotate the wheel, check again at the tightest position, tighten the axle, then remove the gauge.
  • This gauge is for the standard 48–54 mm setting. The owner's manuals also list a wet/mud setting of 62–68 mm (2.4–2.7 in), which this gauge does not set.
  • Always check final chain slack against your owner's manual. This is an aftermarket part made by AzJake Creations, not an OEM part.

FAQ

Is it compatible with a 2022–2026 Kawasaki KX250 or a 2027 KX250F?
Yes, for the years listed under Fit and compatibility. The 2022–2027 owner's manuals list drive chain slack as 48–54 mm (1.9–2.1 in), measured from the swingarm at the rear end of the chain slipper to the bottom of the chain, with the rear wheel off the ground.

Is it compatible with a 2025 Kawasaki KX250X?
Yes. The 2025 KX250X owner's manual lists the same 48–54 mm range and the same measurement as the 2025 KX250. The 2022–2026 KX250X and 2027 KX250FX are listed under Fit and compatibility.

Is it compatible with a 2021 KX250?
2021 is not listed. The 2021 owner's manual was not verified. Check that year's manual before ordering.

Does it set the wet/mud chain slack?
No. The owner's manuals list a wet/mud setting of 62–68 mm (2.4–2.7 in). This gauge checks the standard 48–54 mm setting only.

What chain slack does it set?
It checks that slack is between 1.89 in (48 mm) minimum and 2.13 in (54 mm) maximum, from the swingarm at the rear end of the slipper up to the bottom of the chain. Always verify final chain slack against your owner's manual.

How do I use it?
Raise the rear wheel off the ground, find the tightest point in the chain, and set the gauge on the bare swingarm at the rear end of the chain slipper. Push the chain up and adjust until the bottom of the chain sits between the MIN and MAX marks, recheck, tighten the axle, and remove the gauge.

Is it made in the USA?
Yes. Made in Arizona, USA: designed and 3D printed by AzJake Creations in Arizona.

Free US shipping on orders $14.95 and up.

View full details